Modul Janakuasa Voltan Tinggi dengan Penyegerakkan (80 Jam)

1.    Memiliki perakuan kekompetenan Penjaga Jentera kategori B0 tidak kurang dua (2) tahun pengalaman kerja.
2.    Memiliki buku log yang lengkap berkaitan kerja-kerja dan pengalaman di atas yang telah disahkan oleh orang kompeten berkaitan dan juga majikan.

ATAU

3.    Memiliki perakuan kekompetenan Penjaga Jentera kategori B1 tidak kurang satu (1) tahun pengalaman kerja.
4.    Memiliki buku log yang lengkap berkaitan kerja-kerja dan pengalaman di atas yang telah disahkan oleh orang kompeten berkaitan dan juga majikan.

Modul Talian atas Voltan Tinggi (80 Jam)

1.    Memiliki perakuan kekompetenan Penjaga Jentera kategori B0 tidak kurang dua (2) tahun pengalaman kerja.
2.    Memiliki buku log yang lengkap berkaitan kerja-kerja dan pengalaman di atas yang telah disahkan oleh orang kompeten berkaitan dan juga majikan.

Carta Aliran Menduduki Peperiksaan Perakuan Kekompetenan Jurutera Elektrik Kompeten

Application for Renewal of COA (Import/Manufacture)

Renewal of Certificate Of Approval (COA) to Manufacture, Import, Display or Advertise of Electrical Equipment.

flow4

 

 

Renewal of COA shall be made not less than 14 days before the expiry date, as required under regulation 102 of Electrical Regulations 1994.

A.   Application Procedure

  1. Applicant is required to apply for Renewal of COA through e-Permit.
  2. All approved COA will be displayed at e-Permit and applicant may renew COA by selecting the previous Job Number or Application ID.
  3. Applicant shall complete his/her application by providing all information correctly and attached all required documents.
  4. Unwanted model shall be deleted/removed from e-Permit before submitting the renewal application of COA to Energy Commission (ST).
  5. Application will be rejected if unwanted model was NOT removed from e-Permit. In this case applicant needs to apply for a new COA.
  6. Renewal of COA shall be made within two (2) month before the expiry date and not less than 14 days before the expiry.
  7. Application for Renewal of COA received less than 14 days before expiry will automatically be rejected. In this case applicant needs to apply for a new COA.

B.   Technical documents required are:

  1. Latest test report from testing laboratories recognised by the Commission.
  2. The test report validity period shall not exceed 5 years from the date of testing and the validity of test report shall not less than one year from the expiry date of COA.
  3. In the case of renewal application for COA to import, the proof of purchase of SIRIM’s label for the period of importing and consignment invoice or copy of consignment test report issued by SIRIM are required.
  4. In the case of renewal application for COA to manufacture, the proof of purchase of SIRIM’s label or copy of valid Product Certification license issued by SIRIM are required.

C.   Annual Fee for Renewal of COA

An annual fee of RM100.00 for single phase and RM200.00 for three phase shall be paid upon approval of the COA.

D.   Requirement for Manufacturing

The manufacturer of Electrical equipment that has been approved to manufacture, shall also renew their SIRIM’s Product Certification Scheme (PCS). The electrical equipment shall be affixed with label issued by SIRIM or embossed with SIRIM Certification Mark.

E.   Requirement for Importing

Electrical equipment that has been approved for importing into Malaysia shall comply with the consignment test by SIRIM’s for every batch within the validity period of the COA. The electrical equipment shall be affixed with label issued by SIRIM.
Electrical equipment which failed the Consignment Test need to be sent to the country of origin or shall be destroyed.
Electrical equipment shall be constructed corresponding to power supply cord and power plug which comply with Malaysia’s requirements and standards.
The requirements and standards of Power Supply Cord and Power Plug were stated below:-
Appliances shall be fitted with a suitable and appropriate power supply cord and power plug.  Both are regulated equipment and must be approved by the regulatory body before it can be used on appliances.

1.    The Power Supply Cord shall be certified to :-

  • MS 140 or MS2112-5 or BS 6500 or IEC 60227-1 & IEC 60227-5 (PVC insulated - flexible cables/cords);or
  • MS 140 or BS 6500 or IEC 60245-1 & IEC 60245-4 (Rubber insulated - flexible cables/cords)

2.    The Power Plug to be used in Malaysia shall be as follows:

  • 13A, fused plug complying to MS 589: Part 1 or BS 1363: Part 1;
  • 15A, plugs complying to MS 1577; 2.5A, 250V, flat non-rewireable two-pole plugs with cord for the connection of class II equipment complying to MS 1578 or BS EN 50075.
   
   

Sukatan Pelajaran (Syllabus) Bagi Jurutera Elektrik Kompeten Serta Fi Peperiksaan

 

Sukatan Pelajaran (Syllabus) Bagi Jurutera Elektrik Kompeten

KERTAS 1 - Jawapan bertulis kepada soalan yang disediakan.Perkara-perkara berkaitan:

  1. a) Akta Bekalan Elektrik 1990 dan Akta Suruhanjaya Tenaga 2001
    b) Peraturan-peraturan Elektrik 1994 dan pindaan-pindaannya
    c) MS IEC 60364:2003 ‘Electrical Installations of Building
    d) MS 1936:2006 ‘Electrical Installations of Building – Code of Practice
    e) MS 1936:2006 ‘Electrical Installations of Building – Guide To MS IEC 60364
    f)  Kejuruteraan Elektrik Am
    g) Peraturan Keselamatan (Safety Regulations)
    h) Pertolongan cemas (First Aid)
    i)  Kejuruteraan Elektrik Moden dan Aplikasinya
  2. Kelengkapan Elektrik
    Pengetahuan asas, cirri-ciri keselamatan teknikal, pengoperasian dan penyenggaraan:
    a) Perkakas suis, interrupters, fius dan pengasing, mesin-mesin berputar dan pemula, kuasa, voltan, arus, pembumian, pengubah, kapasitor, perintang, rectifier dan converter, pengalir, kabel, meter, radas petunjuk dan geganti pelindung, penangkap kilat, radas-radas dan aksesori.
  3. Pepasangan Elektrik
    Pengetahuan asas, litar-litar, kapasiti litar pintas, kelegaan keselamatan, operasi dan penyenggaraan:
    a) Set penjanaan dan papan penyegerakkan, motor, pemula dan suis, litar utama, kemasukkan utama dan sub-stesen agihan, papan agihan, feeder pillars, talian atas, penyenggaraan, kabel bawah tanah, pendawaian dalaman, lampu jalan dan lampu laman.
  4. Sistem Elektrik
    Pengetahuan asas, tata atur, paras kerosakan, susut voltan, kehilangan dan pindah beban, keperluan keselamatan, operasi dan penyenggaraan: Penghantaran dan pengagihan rangkaian, sistem pembumian dan perlindungan kilat, pendawaian dalaman, lampu jalan dan lampu laman.
  5. Pelbagai
    Pengetahuan asas, aspek-aspek keselamatan, operasi dan penyenggaraan:
    Penggerak utama stesen janakuasa, on-load tap changes pengubah, sistem pemadam kebakaran, sesalur busbar janakuasa dan medan litar motor, set janakuasa bergerak dan mudah alih.

KERTAS 2 -  Temuduga Profesional

Temuduga professional berdasarkan:-

a)  pengalaman dan latihan yang telah dijalankan oleh calon dan jawapan bertulis kepada soalan yang diberikan.
b)  pengetahuan berkenaan dengan Akta Bekalan Elektrik 1990 dan Akta Suruhanjaya Tenaga 2001 serta Peraturan-Peraturan Elektrik 1994 dan pindaan-pindaannya.   

Fi Peperiksaan Perakuan Kekompetenan Jurutera Elektrik Kompeten

1)    Peperiksaan Perakuan Kekompetenan Jurutera Elektrik Kompeten – RM220.00