Training And Development

Kursus Sepenuh Masa

Kursus sepenuh masa ini dijalankan oleh institusi dari Isnin hingga Jumaat (waktu rasmi atau waktu lain yang ditetapkan oleh institusi). Kursus ini hanya terbuka kepada calon yang tidak bekerja.

Pengenalan

Kursus sepenuh masa ini dijalankan oleh institusi dari Isnin hingga Jumaat (waktu rasmi atau waktu lain yang ditetapkan oleh institusi). Kursus ini hanya terbuka kepada calon yang tidak bekerja.

Kursus dan Latihan

Kursus dan latihan yang dijalankan oleh institusi dibahagikan kepada dua kategori, iaitu Pendawai (Wireman) dan Penjaga Jentera (Chargeman)

Pendawai (Satu Fasa dan Tiga Fasa)
 

Satu Fasa (PW1 / PW2) Kelayakan

PROGRAM I (2 TAHUN)
Kursus ini dijalankan selama dua (2) tahun mengikut susunan berikut:
 

  • Satu (1) tahun di institusi, termasuk menjalani latihan amali sebanyak 3 kali di rumah sebenar sebelum meneruskan latihan industri.
  • Enam (6) bulan menjalani latihan industri dengan Kontraktor Elektrik yang berdaftar dengan Suruhanjaya Tenaga.
  • Enam (6) bulan di institusi secara sepenuh masa.
  • Pembelajaran di institusi merangkumi 40% teori dan 60% amali.
  • Kehadiran kursus di institusi hendaklah tidak kurang daripada 80%.
  • Kehadiran latihan industri hendaklah tidak kurang daripada 90%.
     
Kelayakan asas

PROGRAM II (2 TAHUN)
Kursus ini dijalankan selama dua (2) tahun mengikut susunan berikut:
 

  • Satu (1) tahun di institusi, termasuk menjalani latihan amali sebanyak 3 kali di rumah sebenar sebelum meneruskan latihan industri.
  • Sembilan (9) bulan menjalani latihan industri dengan Kontraktor Elektrik yang berdaftar dengan Suruhanjaya Tenaga.
  • Tiga (3) bulan di institusi secara sepenuh masa.
  • Pembelajaran di institusi merangkumi 40% teori dan 60% amali.
  • Kehadiran kursus di institusi hendaklah tidak kurang daripada 80%.
  • Kehadiran latihan industri hendaklah tidak kurang daripada 90%.
     
Kelayakan asas
Satu Fasa (PW1 / PW2) Kelayakan

PROGRAM III (15 BULAN)
Kursus ini dijalankan selama satu (1) tahun tiga (3) bulan mengikut susunan berikut:
 

  • Enam (6) bulan di institusi, termasuk menjalani latihan amali sebanyak dua (2) kali di rumah sebenar sebelum meneruskan latihan industri.
  • Enam (6) bulan menjalani latihan industri dengan Kontraktor Elektrik yang berdaftar dengan Suruhanjaya Tenaga.
  • Tiga (3) bulan di institusi secara sepenuh masa.
  • Pembelajaran di institusi merangkumi 40% teori dan 60% amali.
  • Kehadiran kursus di institusi hendaklah tidak kurang daripada 80%.
  • Kehadiran latihan industri hendaklah tidak kurang daripada 90%.
     

Kelayakan Asas:

  • Mempunyai pengalaman kerja selama satu (1) tahun dalam bidang pendawaian elektrik dengan Kontraktor Elektrik yang berdaftar dengan Suruhanjaya Tenaga.
  • Mempunyai buku log yang lengkap berdasarkan pengalaman kerja satu (1) tahun dalam pendawaian, yang disahkan oleh orang kompeten dan majikan.
  • Mempunyai penyata KWSP atau PERKESO sebagai bukti pengalaman kerja sekurang- kurangnya satu (1) tahun.
     
Tiga Fasa ( PW3 / PW4 ) Kelayakan

PROGRAM I (3 TAHUN)
Kursus ini dijalankan selama tiga (3) tahun mengikut susunan berikut:
 

  • Dua (2) tahun di institusi, termasuk menjalani latihan amali sebanyak 3 kali di rumah sebenar sebelum meneruskan latihan industri.
  • Enam (6) bulan menjalani latihan industri dengan Kontraktor Elektrik (Kelas C dan ke atas) yang berdaftar dengan Suruhanjaya Tenaga.
  • Enam (6) bulan di institusi secara sepenuh masa.
  • Pembelajaran di institusi merangkumi 40% teori dan 60% amali.
  • Kehadiran kursus di institusi hendaklah tidak kurang daripada 80%.
  • Kehadiran latihan industri hendaklah tidak kurang daripada 90%.
     
  • Kelayakan Asas
Tiga Fasa ( PW3 / PW4 ) Kelayakan

PROGRAM II (1 TAHUN)
Kursus ini dijalankan selama satu (1) tahun mengikut susunan berikut:
 

  • Enam (6) bulan di institusi, termasuk menjalani latihan amali sebanyak 2 kali di rumah sebenar sebelum meneruskan latihan industri.
  • Enam (6) bulan menjalani latihan industri dengan Kontraktor Elektrik yang berdaftar dengan Suruhanjaya Tenaga.
  • Tiga (3) bulan di institusi secara sepenuh masa.
  • Pembelajaran di institusi merangkumi 40% teori dan 60% amali.
  • Kehadiran kursus di institusi hendaklah tidak kurang daripada 80%.
  • Kehadiran latihan industri hendaklah tidak kurang daripada 90%.
     
  • Kelayakan Asas
    Mempunyai Sijil Kompetensi Pendawaian Satu Fasa (PW1/PW2).

Category for Chargeman - A0 until B4

Category for A0
Programs Qualifications

PROGRAM  I  (3 YEARS)
This courses conducted for a three (3) years by these sequence:


  • One (1) year in institution with practical training
  • Eighteen (18) month industrial training in industries/factories registered with Energy Commission.
  • Six (6) month in institution for refresher course and final exam.
  • Attendant course in the institution not less than 80%.
  • Attendant for industrial training not less than 90%
Basic Qualification

PROGRAM II (2 YEARS)
This courses conducted for a two (2) years by these sequence:

  • One (1) year in institution with practical training.
  • Six (6) month industrial training in industries/factories registered with Energy Commission.
  • Six (6) month in institution for refresher course and final exam
  • Attendant course in the institution not less than 80%.
  • Attendant for industrial training not less than 90%
  • Basic requirement
  • Possess either one from these certificates:
     
    • Possess a Single Phase and Three Phase wiring certificate of competency (PW1/PW2/PW3/PW4/PW6)
      OR
      Polytechnic Certificate (Electrical Engineering)

PROGRAM  II  (4 MONTHS-16 WEEKS)
This courses conducted for a four (4) months by these sequence:

  • Eight (8) months in institution with practical
  • Four (4) months industrial training in industries/factories registered with Energy Commission
  • Four (4) month in institution for refresher course and final exam
  • Attendant course in the institution not less than 80%.
  • Attendant for industrial training not less than 90%
  • Basic requirement
    Experience:
    i.    Possess not less than 3 years working experience in an environment involving operation of electrical equipment and has experiences in controlling live equipment, and

    ii.   Possess complete log book based on 3 years working experience in an environment involving operation of electrical equipment and controlling live equipment validated by a competent person and the employer.
    OR

    iii.  Possess certificate of competency;
            a.   Wireman PW1/PW2/PW3/PW4/PW6
                  OR
            b.   Polytechnic certificate(Electrical 
                  Engineering)

    iv.  Possess not less than 2 years working experience in an environment involving operation of electrical equipment and has experiences in controlling live equipment

    v.   Possess complete log book based on 2 years working experience in an environment involving operation of electrical equipment and controlling live equipment validated by a competent person and the employer
Category for A1
Programs Qualifications

PROGRAM  I (3 YEARS)
This courses conducted for a three (3) years by these sequence:

  • One (1) year  in institution with practical training
  • Eighteen (18) month industrial training in an industries/factories registered with Energy Commission
  • Six (6) month in institution for refresher course and final exam.
  • Attendant course in the institution not less than 80%.
  • Attendant for industrial training not less than 90%
Basic Requirement

PROGRAM  II (18 MONTH)
This courses are conducted for a eighteen (18) months by these sequence:

  • Ten (10) Month in institution with practical training
  • Four (4) months industrial training in an industries/factories registered with Energy Commission.
  • Four (4) months in institution for refresher course and final exam
  • Attendant course in the institution not less than 80%.
  • Attendant for industrial training not less than 90%
  1. Basic requirement.
    Experience:
    i.     Possess not less than 3 years working experience in an environment involving operation of electrical equipment and has experiences in controlling live equipment including 1 year experience in installation and low voltage aerial line maintenance, and
    ii.    Possess complete log book based on 3 years working experience in an environment involving operation of electrical equipment and controlling live equipment including installation works and low voltage aerial line maintenance validated by a competent person and the employer,
    OR
    iii.   Possess a Chargeman AO certificate of competency at least 1 year working experience in low voltage aerial line operation,  and
    iv.   Possess complete log book based on 1 year working experience in low voltage aerial line maintenance validated by a competent person and the employer.
    OR
    v.    Possess a Wireman certificate of competency (PW1/PW2/PW3/PW4) not less than 2 years working experience
    (Note: 1 year working experience in an environment involving operation of electrical equipment and controlling live equipment and 1 year working experience in low voltage aerial line maintenance), and
    vi.   Possess complete log book based on 2 years working experience in an environment involving operation of electrical equipment and controlling live equipment including low voltage aerial line maintenance validated by a competent person and the employer.
Category for A4-2
Programs Qualifications

PROGRAM  (20 WEEKS)
This courses are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) months industrial training in an industries/factories registered with Energy Commission
    Four (4) weeks in institution for refresher course and final exam
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic Requirement
    Possess a Chargeman AO certificate of competency with 1 years working experience  in low voltage of generators, and
    Possess a complete log book based on 1 years working experience in generators validated by a competent person and the employer.
Category for A4-1
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement.
    Experience:
    i.    Possess a Chargeman AO certificate of competency at least 1 year working experience in low voltage standby generator and 1 year in installation and maintenance of low voltage aerial line, and
    ii.   Possess complete log book based on 1 years working experience low voltage standby generator and 1 year in installation and maintenance of low voltage aerial line validated by a competent person and the employer.
    OR
    iii.  Possess a Chargeman A1 certificate of competency at least 1 year working experience in low voltage standby generator, and
    iv.  Possess complete log book based on 1 year working in experience in low voltage standby generator validated by a competent person and the employer.
    OR
    v.   Possess a Chargeman A4-2 certificate of competency at least 1 year working experience in installation and maintenance low voltage aerial line, and
    vi.  Possess complete log book based on 1 year working experience in installation and maintenance low voltage aerial line validated by a competent person and the employer.
Category for A4
Programs Qualifications

PROGRAM  I (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) month in institution with practical training.
    Four (4) months industrial training in industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement.
    Experience:
    i.    Possess a Chargeman AO certificate of competency with 2 years working experience with 1 year in low voltage synchronizing of generators and 1 year in installation and maintenance low voltage aerial line, and
    ii.   Possess a complete log book based on 2 years working experience in synchronizing of generators and also with installation and low voltage aerial line maintenance for the period of the above experience, validated by a competent person and the employer.
    OR
    iii.    Possess a Chargeman A1  certificate of competency with 1 year working experience in low voltage synchronizing of generators, and
    iv.    Possess a complete log book based on 1 year working experience in low voltage synchronizing of generators, validated by a competent person and the employer.
    OR
    v.    Possess a Chargeman A4-1 certificate of competency with 1 year working experience in low voltage synchronizing of generators, and
    vi.   Possess a complete log book based on 1 year working experience in low voltage synchronizing of generators validated by a competent person and the employer.

PROGRAM  II (1 YEARS)
These course are conducted for a one (1) year by these sequence:

  • Three (3) months in institution with practical training.
    Six (6) months industrial training in industries/factories registered with Energy Commission.
    Three (3) months in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement.
    Experience:
    i.    Possess a Chargeman A1 certificate of competency.
    OR
    ii.   Possess a Chargeman A4-1 certificate of competency.
Category for B0-2
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement
    Possess a Chargeman A4-2 certificate of competency  with 2 years experience in high voltage system
    Possess a complete log book based on 2 year working experience in high voltage system, validated by a competent person and the employer
Category for B0-1
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in industries/factories registered with Energy Commision.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement.
    Experience:
    i.    Possess a Chargeman A4-1 certificate of competency with 2 years experience in high voltage system, and
    ii.    Possess a complete log book based on 2 year working experience in high voltage system, validated by a competent person and the employer
    OR
    iii.    Possess a Chargeman BO-2 certificate of competency with one year experience in low voltage aerial line
    vii.   Possess a complete log book based on 2 year working experience in low voltage aerial system, validated by a competent person and the employer
Category for B0
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement
    Experience:
    i.    Possess a Chargeman A4 certificate of competency with a two years experience in high voltage system, and
    ii.    Possess a complete log book based on 2 year working experience in high voltage system, validated by a competent person and the employer.
    OR
    i.    Possess a Chargeman BO-1 certificate of competency with one year in low voltage synchronizing generators.
    ii.    Possess a complete log book based on 1 year working experience in low voltage synchronizing generator, validated by a competent person and the employer.
    OR
    v.    Possess a Chargeman BO-2 certificate of competency with 1 year experience in low voltage synchronizing generator and one year in low voltage aerial line, and
    vi.    Possess a complete log book based on 1 year working experience in low voltage synchronizing generator and 1 year in low voltage aerial line, validated by a competent person and the employer
Category for B1
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement
    Experience:
    i.    Possess a Chargeman A4 certificate of competency with 1 year experience in high voltage system and 1 year in high voltage aerial line, and
    ii.   Possess a complete log book based on 1 year working experience in high voltage system and 1 year in high voltage aerial line, validated by a competent person and the employer.
    OR
    iii.   Possess a Chargeman BO with 1 year experience in high voltage aerial line, and
    iv.   Possess a complete log book based on 1 year working experience in high voltage aerial line, validated by a competent person and the employer.
Category for B4
Programs Qualifications

PROGRAM  (20 WEEKS)
These course are conducted for a five (5) months by these sequence:

  • Three (3) months in institution with practical training.
    Four (4) weeks industrial training in an industries/factories registered with Energy Commission.
    Four (4) weeks in institution for refresher course and final exam.
    Attendant course in the institution not less than 80%.
    Attendant for industrial training not less than 90%
  • Basic requirement.
    Experience:
    i.     Possess a Chargeman BO certificate of competency with 1 year experience in high voltage aerial line and one year in high voltage synchronizing generators, and
    ii.   Possess a complete log book based on 1 year working experience in high voltage aerial line and one year experience in high voltage synchronizing generators, validated by a competent person and the employer.
    OR
    iii.    Possess a Chargeman BI certificate of competency with one year experience in high voltage synchronizing generators, and
    iv.    Possess a complete log book based on 1 year working experience in high voltage synchronizing generators, validated by a competent person and the employer.